Two component polyester putty with BPO hardener, it is specially formulated for dry
sanding and has very good adhension to aluminium, galvanized steel, steel, etc.

 

Substrates	Sanded galvanized steel, aluminium, steel or epoxy primer
Surface Cleaning	Remove wax, silicon, and other contaminations with degreaser.
Mixing Ratio	Putty: Hardener=100: 2 ( by weight )
Pot Life	2-3 min ( 25℃ )
Dty-to-Sand	15-25min（25℃）
Sanding	P120-240
Method of Application	Spread with putty knife, spreader
Not Suitable Substrates	Thermoplastic paint, plastic primer, etch primer
Shelf Life	6 months in original sealed can at cool and dry place at 20℃.
Packaging	1.5kg

 

Note：

1．Stir well before use. Do not restore excess materials to can.

2．Mix with hardener by right ratio. Blend them well to avoid cracking or poor curing.

3．The putty hardener is flammable, explosive and irritating to skin. Avoid contact with skin.

4．Spread a thin coat once on the surface. Deep repair area better spread with several thin coats.
5．Do not apply topcoat on putty directly to avoid loss of gloss of topcoat.